Camden Wall Mounted Lever

Each fixture is crafted with sophisticated British flair that adds a distinctive touch to your interior.

This elegant lever is defined by the ebony wood that highlights its delicate curved handle. Camden fittings and designs are complete with a fine ebony inlaid base that is also available in all metal. 

Available in ½” NPT and ¾” NPT.

Share

Description

Camden Wall Mounted Lever 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ½” valves
  • Lever turns upward 
  • Right & left  lever supplied
  • Total projection :4”
  • Width: diameter 2.75” at base
  • Available in all metal base or a wood inlaid base
  • Lever Handle: 5” Long
  • Available in all finished. All finished are live. 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk ( ½” or ¾” )
  • Made with low lead brass; includes possible ABS component
  • OPTION WITH METAL BASE
    • Ref number for ½” valve : Right Hand: 14606730-ANSPB
    • Ref number for ½” valve : Left Hand:    14606731-ANSPB
  • OPTION WITH WOOD BASE
    • Ref number for ½”  valve : Right Hand: 14606730-ANSPA
    • Ref number for ½” valve : Left Hand: 14606731 -ANSPA
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  50 to 60 PSI
  4. Connections: ¾” female 
  5. Handle spread: N/A 
  6. Metric threading available on request
  7. Flow rate for outside California or the USA: inquire
  8. Complies with California State water flow regulations
  9. Flow rate: installation must comply with your state regulation
  10. Meets California standard on multiple water point
  11. See technical drawings

3/4" Details

Camden Wall Mounted Lever 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾” valves- 
  • Lever turns upward 
  • Right & left  lever supplied
  • Total projection:4”
  • Width: diameter 2.75” at base
  • Available with an all metal base or a wood inlaid base
  • Lever Handle: 5” Long
  • Available in all finished. All finished are live. 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk 
  • Made with low lead brass; includes possible ABS component
  • OPTION WITH METAL BASE
    • Ref number for ¾” valve : Right Hand: 14606735-ANSPB
    • Ref number for ¾” valve : Left Hand:    14606736-ANSPB
  • OPTION WITH WOOD BASE 
    • Ref number for ¾” valve : Right Hand: 14606735-ANSPA
    • Ref number for ¾” valve : Left Hand: 14606736 -ANSPA
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  50 to 60 PSI
  4. Connections: ¾” female 
  5. Handle spread: N/A 
  6. Metric threading available on request
  7. Flow rate for outside California or the USA: inquire
  8. Complies with California State water flow regulations
  9. Flow rate: installation must comply with your state regulation
  10. Meets California standard on multiple water point
  11. See technical drawings

Technical Specs

1/2″ Wood Base:
Camden – Wall mounted handle _ Wood base .5 inch NPT _ 14606730 – 14606731 _ ANSPA specifications sheet

1/2″ Metal Base:
Camden – Wall mounted handle _ metal base .5 inch NPT _ 14606730 – 146067231 _ ANSPB specifications sheet

3/4″ Wood Base:
Camden – Wall mounted handle _ Wood base .75 inch NPT _ 14606735 – 14606736 _ ANSPA specifications sheet

3/4″ Metal Base:
Camden – Wall mounted handle _ metal base .75 inch NPT _ 14606735 – 14606736 _ ANSPB specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content