Description
Madison Deck Mounted Lever 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- An uptown 1930’s flair infuses the flowing shape of this lever handle
- Deck mounted ½” valves included
- Lever turns ¼ forward – Left and Right supplied
- Total height: 4 1/8”
- Width: 4 7/8” from center to end of the lever
- Available in all finishes. All finishes are unlaquered
- Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS component
- Ref # : Right hand 09106720
- Ref # : Left hand: 09106721
- Wall-mount setting available
|
- Deck maximum thickness: 2” ( 5 cm )
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection : wire flex provided ; ½” connector
- Handle spread: max. 11inches
- Metric threading available on request
- Flow rate for outside USA: inquire
- See technical drawings
|
3/4" Details
Madison Deck Mounted Lever 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- An uptown 1930s flair infuses the flowing shape of this lever handle
- Deck mounted ¾” valves included
- Lever turns ¼ forward – Left and Right supplied
- Total height: 4 1/8”
- Width: 4 ⅞” from center to end of the lever
- Available in all finishes. All finishes are unlacquered
- Flow rate : 1.75 GPM at 60 PSI
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS component
- Ref # : Right 0910 6725
- Ref #: Left 09106726
|
- Deck maximum thickness: 2” ( 5 cm )
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection : ¾” female NPT
- Metric threading available on request
- Flow rate for outside USA: inquire
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.