Tudor Deck Mounted Handle

Emerging from a waved pattern with reticulated guilloché trim this handle is haloed with a Tudor rose emblematic of its heraldic origins.

Available in ½” and ¾” NPT for vanities and tubs.

Share

Description

Tudor Deck Mounted Handle 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Deck mounted ½” valve for vanities
  • Handles turns ¼ to the right  
  • Total height : 2. 9/16 “
  • Width : 2.75” diameter
  • Available in all finishes. All finishes are live
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk ( ½” for vanity / ¾” for tub)
  • Made with low lead brass; includes possible ABS components.     
  • Ref number with  ½” valve: 08906720
  1. Deck maximum thickness: 2”  ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60 PSI
  5. Connection : wire flex provided ; ½” connector
  6. Handle spread: max. 11 inches 
  7. Metric threading available on request
  8. Flow rate for outside USA: inquire
  9. Wall mounted handles : available 
  10. See technical drawings

3/4" Details

Tudor Deck Mounted Handle 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Deck mounted ¾” valve for tubs 
  • Handles turn ¼ to the left
  • Total height: 2. 9/16 “
  • Width : 2.75” diameter
  • Available in all finishes. All finishes are unlacquered
  • Flow rate : unrestricted  at 60 PSI (4.1 Bar)
  • Valves: ceramic disk 
  • Made with low lead brass; may include ABS components.      
  • Ref number with  ¾” valve: 08906735
  1. Deck maximum thickness: 2”  ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection: ¾” Female NPT
  6. Metric threading available on request
  7. Flow rate for outside the USA: inquire
  8. Wall-mounted handles : available 
  9. See technical drawings

Rotary Mixer Details

Tudor Deck Mounted Rotary Mixer 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Deck mounted ½”  rotary Mixer 
  • activated by a ceramic disk
  • the water mixes  from cold to hot  
  • does not control the volume of water  
  • height: 3.3” 
  • Width / diameter base: 2-3/4”
  • usage: to activate a handheld or a single spout 
  • Made with low lead brass; includes possible ABS components.   
  • Ref number for ½”:  08506121
  1. In/Flow Connection: 2 x G1/2”
  2. Mixed water outflow  connection: ½” F.NPT   
  3. Recommended Pressure: 45 PSI
  4. Recommended Flow: 1.8 GPM for CA. State
  5. Metric Threading available upon request
  6. Flow rate for outside the USA: inquire
  7. See technical drawing

Technical Specs

Tudor – Deck mounted handle .5 inch NPT _ 08906720 specifications sheet

Tudor – Deck mounted handle .75 inch NPT _ 08906725 specifications sheet

Tudor – Deck mounted rotary mixer G .5 _ 08906121 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content