Share

Tudor Wall Mounted Handle

Emerging from a waved pattern with reticulated guilloché trim. This handle is haloed with a Tudor rose emblematic of its heraldic origins.

Available in ½” and ¾” NPT for vanities and tubs.

Description

Tudor Wall Mounted Handle 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall mounted ½” valves-
  • Handle lever turns ¼ to the right – left and right handle supplied                            
  • Total height : 2-9/16”
  • Width: Handle:2-5/8” 
  • Available in all finishes. All finishes are unlacquered
  • Flow rate: 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk
  • Made with low lead brass; includes possible ABS components
  • Ref # for ½” valve : 08906730
  1. Rough In Depth: Minimum 234” – Maximum 518 
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection :  ½” NPT
  6. Metric threading available on request
  7. Flow rate for outside the USA: inquire
  8. Deck mounted handles: available 
  9. See technical drawings

 

With delicate petals and a floral finial the Tudor set plays on duality between its bucolic theme and elegant design. Tudor Wall Mounted Handle is sculptural yet restrained, and vibrant with a soft touch.

At Compas, we maintain an expert understanding of design history. To guarantee beauty and inspirational products, we integrate high standards in our fabrication processes. We make sure that our manufacturing methods do not impact our environment negatively. You can buy Fixtures, Stones, Terra Cotta, Sinks and Home appointments with us and also, visit us at our Los Angeles location.

The highest quality comes from having the highest standards. Compas meticulously chooses and sources the best materials to manufacture its products. To conceptualize tomorrow’s estates, we can work around the purest ingots to cast our fixtures or the rarest marbles.

To complement its collections Compas designs and manufactures artistically detailed European bath systems, faucets and accessories, all fitted with state-of-the-art high technology components that function seamlessly for contemporary living.

3/4" Details

Tudor Wall Mounted Handle 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall mounted ¾” valves-
  • Handle Lever turns ¼ to the right – left and right handle supplied
  • Total height : 2-9/16”
  • Width: Handle:2-5/8” 
  • Available in all finishes. All finishes are unlacquered.. 
  • Flow rate : 1.75 GPM at 60 PSI (4.1 Bar)
  • Valves: ceramic disk
  • Made with low lead brass; includes possible ABS components               
  • Ref number for 3/4”” valve : 08906735
  1. Rough In Depth: Minimum 234” – Maximum 518 
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection :  ¾” F.  NPT
  6. Metric threading available on request
  7. Flow rate for outside the USA: inquire
  8. Deck mounted handles: available 
  9. See technical drawings

Technical Specs

Tudor-Wall-mounted-handle-.5-inch-NPT-_-08906730 specifications sheet

Tudor-Wall-mounted-handle-.75-inch-NPT-_-08906735 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Request information

Skip to content