Description
Margot Wall Mounted Handle 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall mounted ½” NPT-
- Handle turns ¼ to the right –
- Total height : 3”
- Width: 2-1/5” Diameter
- Available in all finishes. All finishes are unlacquered.
- Available with semi precious stone inlaid or with no stone inlaid
- Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- Valves: ceramic disk cartridge ( ½” )
- Made with low lead brass; includes possible ABS components.
- Ref# : right hand 12006730
- Ref# : left hand 12006731
|
- Rough In Depth: Minimum 2-3/4” – Maximum 5-1/8”
- unrestricted flow: up to 12 GPM at 75 PSI
- Recommended pressure: 60PSI
- Flow:California resident 1.2GPM at 45 PSI
- Connection : ½” NPT
- Handle spread: max. 11inches
- Metric threading available on request
- made with low lead brass- Compliant
- See technical drawings
|
3/4" Details
Margot Wall Mounted Handle 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall mounted ¾” NPT-
- Total height : 3”Width: 2-1/5” Diameter
- Available in all finishes. All finishes are unlacquered.
- Available with semi precious stone inlaid or with no stone inlaid
- Flow rate : 1.75 GPM at 60 PSI
- Valves: ceramic disk cartridge (¾”)
- Made with low lead brass; includes possible ABS components.
- Ref# : right hand 12006735
- Ref# : left hand 12006736
|
- Rough In Depth: Minimum 2-3/4” – Maximum 5-1/8”
- unrestricted flow: up to 12 GPM at 75 PSI
- Recommended flow: 9 GPM at 60PSI
- Flow:California resident restrictions apply.
- Connection : ¾” NPT
- Handle spread: max. 11inches
- Metric threading available on request
- made with low lead brass- Compliant
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.