Cruciform Deck Mounted Handle

Meticulously detailed and textured. This fixture’s artisanal quality is sure to sublime any space. Deck mounted handle with beaded escutcheon detail. Available in 1/2″ NPT 3/4″ NPT.

Also available with a Miramare backplate.

Share

Description

Cruciform Deck Mounted Handle 1/2″ NPT

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Renaissance  jewel inspired with assertive decorative language           
  • Deck mounted ½” valves –  
  • Handle turns ¼ to the left  
  • Total height: 3”1/4
  • Width/diameter  : 2.75”
  • Available in all finishes. All finishes are live
  • Flow rate : 1.2 GPM  at 60 PSI  —  (4,5L/min @ 4.1 Bar )
  • Valves: ceramic disk  ½”    
  • Made with low lead brass; includes possible ABS components
  • Ref number with ½” valve  :08506720
  • If you add a Miramare escutcheon plate : use ref code 03706720
  1. Deck maximum thickness: 2”  ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection : wire flex provided ; ½” connector
  6. Handle spread: max. 11inches 
  7. Metric threading available on request
  8. Flow rate for outside USA: inquire
  9. Wall mounted handle : available 
  10. See technical drawings

 

3/4" details

Cruciform Deck Mounted Handle 3/4″ NPT

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Renaissance  jewel inspired with assertive decorative language         
  • Deck mounted 3/4” valves –  
  • Handle turns ¼ to the left  
  • Total height: 3”1/4
  • Width/diameter  : 2.75”
  • Available in all finishes. All finishes are live
  • Flow rate : 1.2 GPM  at 60 PSI  —  (4,5L/min @ 4.1 Bar )
  • Valves: ceramic disk  ¾”    
  • Made with low lead brass; includes possible ABS component
  1. Deck maximum thickness: 2”  ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection : wire flex provided ; ½” connector
  6. Handle spread: max. 11inches 
  7. Metric threading available on request
  8. Flow rate for outside the USA: inquire
  9. Wall mounted handle : available 
  10. See technical drawings

 

Technical Specs

Cruciform – Deck mounted handle .5 inch NPT _ 08506720 specifications sheet

Cruciform – Deck mounted handle .75 inch NPT _ 08501725 specifications sheet

Cruciform – Deck mounted mixer -G .5 inch- _ 8506121 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content