Description
Liberty Wall Mounted Lever 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Pure in essence, fluid, and clean with many crystal lever color options.
- Wall mounted ½” valves-
- Handles : left and right lever supplied
- Total height : 4 ½”
- Width: Diameter 4 ¾”
- Available in all finished. All finished are live.
- Multiple Colors available for the crystal glass lever
- Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- Valves: ceramic disk ( ½” or ¾” )
- Made with low lead brass; includes possible ABS component and crystal glass
- Ref number for ½” valve : Right Hand: 11106730
- Ref number for ½” valve : Left Hand: 11106731
- option: ¾” valves available
|
- Rough In Depth: Minimum 234” – Maximum 518”
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection : wire flex provided for ½” connector
- Handle spread: max. 11inches for ½” levers
- Metric threading available on request
- Flow rate for outside the USA: inquire
- Deck mounted handles: available
- ¾” valves available
- See technical drawings
|
3/4" Details
Liberty Wall Mounted Lever 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Pure in essence, fluid, and clean with many crystal lever color options.
- Wall mounted ¾” valves-
- Handles : left and right lever supplied
- Total height : 4 ½”
- Width: Diameter 4 ¾”
- Available in all finished. All finished are unlacquered.
- Multiple Colors available for the crystal glass lever
- Flow rate : 1.75 GPM at 60 PSI (4.1 Bar)
- Valves: ceramic disk ( ¾” )
- Made with low lead brass; includes possible ABS component and crystal glass
- Ref number for ¾” valve : Right Hand: 11106735
- Ref number for ¾” valve : Left Hand: 11106736
|
- Rough In Depth: Minimum 234” – Maximum 518”
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Handle spread: N.A.
- Metric threading available on request
- Flow rate for outside the USA: inquire
- Deck mounted handles: available
- ¾” cartriges available
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.