Liberty Deck Mounted Lever

Crafted in fine crystal and also offered in Ruby Red, Amethyst or Sapphire blue, this refined lever is suitable for any modern or classical interior. Available in 1/2″, 3/4″ or as a diverter.

Share

Description

Liberty Deck Mounted Handle 1/2″ Details

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Pure in essence ,fluid and clear with many lever options
  • Deck mounted ½” valve included
  • Handles turns ¼  forward –
  • Right and Left hand supplied   
  • Total height :4 ½”
  • Width : 4 ¾”
  • Available in all finishes. All finishes are live
  • Multiple colors available for the crystal glass lever 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk
  • Made with low lead brass; includes possible ABS component and crystal glass
  • Ref number : 11106720
  1. Deck maximum thickness: 2”  ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection : wire flex provided ; ½” connector
  6. Handle spread: max. 11inches 
  7. Metric threading available on request
  8. Flow rate for outside USA: inquire
  9. Wall mounted fitting available 
  10. ¾” valves available 
  11. See technical drawings

3/4" Details

Liberty Deck Mount Handle 3/4″ Details

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Its crystal lever adds a magical dash of light to the ubiquity of its inherent beauty.
  •  Deck mounted ¾” lever with valve included
  • Lever turns ¼  forward  – left and right handle supplied   
  • Total height: 4”
  • Width: 2 ½ diameters at base 
  • Also available in ½”. 
  • Lever handle: 4” long 
  • Available in all finishes. All finishes are live
  • Flow rate: 1.75 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk  
  • Made with low lead brass; includes possible ABS component and wood 
  • Ref #: Right hand: 11106725
  • Ref #: Left  hand:  11106726
  1. Deck maximum thickness: 1,75” ( 5 cm )
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure 60PSI
  5. Connection: ¾” NPT 
  6. Handle spread: max: open 
  7. Metric threading available on request
  8. Flow rate for outside the USA: inquire
  9. Wall-mounted lever:  available 
  10. See technical drawings

Rotary Mixer Details

Liberty Deck Mount Handle Rotary Mixer Details

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • this elegant and practical deck-mounted mixer pairs well with handheld showers  in a comfortably fitted bathroom or a convivial bar area. 
  •  Deck mounted with ½ NPT  feeder lines.
  • Activated by a lever rotating left to right for temperature control .
  •  Uses a ceramic cartridge (included)
  • Total Height: 4”
  • Projection: 4.25” from the center of the handle.
  • Width / diameter base: 2 ½” 
  • Available in all finishes. All finishes are live
  • California flow rate: 1.2 GPM 
  • Other flow rates: available-please inquire 
  • Made with low lead brass. Includes possible ABS component
  • Ref number: 11106121
  1. In/Flow Connection: Female  G ½”
  2. Recommended Pressure: 45 PSI
  3. Metric threading available upon request
  4. Flow rate for outside the USA: inquire
  5. Requires a handheld spray 
  6. Weighted average lead content complies with 0.25%
  7. See technical drawing

Technical Specs

Liberty – Deck mounted handle .5 inch NPT _ 11106720 specifications sheet

Liberty – Deck mounted handle .75 inch NPT _ 11106725 specifications sheet

Liberty – Deck mounted rotary mixer G- .5 inch _ 11106121 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content