Knurl Wall Mounted Handle

A low profile pure silhouette defines this unit. Accentuated by its textured lines around its edges for ease of use. 

Available in 1/2″ NPT and 3/4″ NPT.

Share

Description

Knurl Wall Mounted Handle 1/2″ details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ½” valves-(* Tub Wall mount available in ¾” valve) 
  • Total height: 2 ½” 
  • Width: Diameter 2 ¼”
  • Available in all finished. All finished are unlacquered. 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk ( ½” )
  • Made with low lead brass; includes possible ABS component
  • Wall Mount ½” & ¾” valves setting available
  • Ref number for ½” valve:12906730
  • Rough In-Depth: Minimum 234” – Maximum 518 
  • Hole diameter: 1.1/8” ( 3 cm )
  • Water pressure maximum: 75 PSI (5 Bars)
  • Recommended pressure: 60PSI
  • Connection: wire flex provided; ½” connector
  • Handle spread: N.A.
  • Metric threading available on request
  • Flow rate for outside the USA: inquire
  • Deck mounted handles: available 
  • ¾” valves available
  • Adaptable with any Compas Product line
  • See technical drawings

 

3/4" details

Knurl Wall Mounted Handle 3/4″ details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾” valves-
  • Total height: 2 ½” 
  • Width: Diameter 2 ¼”
  • Available in all finished. All finished are unlacquered. 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 50 PSI 
  • Valves: ceramic disk (¾”)
  • Made with low lead brass; includes possible ABS component
  • Wall Mount ½” & ¾” valves setting available
  • Ref number for ½” valve:12906735
  • Rough In-Depth: Minimum 234” – Maximum 518 
  • Hole diameter: 1.1/8” ( 3 cm )
  • Water pressure maximum: 75 PSI (5 Bars)
  • Recommended pressure: 50PSI
  • Connection: F ¾” NPT
  • Handle spread: N.A.
  • Metric threading available on request
  • Flow rate for outside the USA: inquire
  • Deck mounted handles: available 
  • Adaptable with any Compas Product line
  • See technical drawings 

 

Technical Specs

Knurl – Deck mounted handle – .5 inch NPT _ 129SP6720 specifications sheet

Knurl – Wall mounted handle .75 inch NPT _ 12906735 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content