Description
Madison Wall Mounted Lever 1/2″ Details
HALLMARKS AND COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall-mounted ½” valves. compliant
- Lever turns ¼ up and includes a rotation brake
- left and right lever supplied
- Total projection: 4-1/8”
- Width: 5-1/8” center to end of the lever
- Available in all finishes. All finishes are unlacquered.
- Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS components.
- Ref number for ½” valve : Right Hand: 09106730
- Ref number for ½” valve : Left Hand: 09106731
|
- Rough In-Depth: Min: 2-3/4” – Max. :5-1/8”
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- ½” female NPT inlet.
- Metric threading available on request
- Flow rate for outside the USA: inquire
- Deck mounted handles: available
- ¾” valves available
- See technical drawings
|
3/4" Details
Madison Wall Mounted Lever 3/4″ Details
HALLMARKS AND COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall-mounted ¾” valves.
- Lever turns ¼ up and includes a rotation brake
- Left and right lever supplied
- Total projection: 4-1/8”
- Width: 4-7/8” from center to end of the lever
- Available in all finishes. All finishes are unlacquered.
- Flow rate : 1.75 GPM at 60 PSI
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS component
- Ref # for ¾” valve : Right Hand: 09106735
- Ref # for ¾” valve : Left Hand: 09106736
|
- Rough In-Depth: Min: 2-3/4” – Max. :5-1/8
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- ¾” female NPT inlet.
- Metric threading available on request
- Flow rate for outside the USA: inquire
- Deck mounted handles: available
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.