Description
Retro Wall Mounted Handle 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Vanity or shower wall-mounted ½” valves
- Handle ¼” turns to open
- Available in all finished. All finished are live.
- Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- max flow rate 2.2 GPM at 60 PSI
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS components.
- Ref number for ½” valve : 11506730
|
- Rough In-Depth: Minimum 234” – Maximum 518″
- Hole diameter: 1½ ” ( 4 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection: NPT standard
- Metric threading available on request
- Flow rate for outside the USA: inquire
- California flow rate applies
- See technical drawings
|
3/4" Details
Retro Wall Mounted Handle 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Vanity or shower wall-mounted 3/4” valves
- Handle ¼” turns to open
- Available in all finished. All finished are live.
- Flow rate : 1.75 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
- Max flow rate 2.2 GPM at 60 PSI
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS components.
- Ref number for ¾” valve : 11506735
|
- Rough In-Depth: Minimum 234” – Maximum 518”
- Hole diameter: 1½ ” ( 4 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection: NPT standard
- Metric threading available on request
- Flow rate for outside the USA: inquire
- California flow rate applies
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.