Description
Lotus Wall Mounted Handle 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall-mounted ½” valves and cartridge
- ½” NPT
- Total projection of handle : 3.⅞”
- Trim and valve supplied together
- flow rate: restricted : 1.2 GPM
- Available in all finishes. All finishes are live
- Made with low lead brass; includes possible ABS component
- Ref number:01406730
- OPTION
To be used in conjunction with our thermostatic shower systems.
|
- Rough In-Depth: Minimum 2.75” – Maximum 518”
- Water pressure maximum: 45 PSI
- Recommended pressure: 45 to 60 PSI
- Connections: ½” female NPT
- maximum flow: 14 GPM
- to be used with our ¾” thermostatic valve
- Metric threading available on request
- Flow rate for outside California or the USA: inquire
- unrestricted flow rate: installation must comply with your local State regulation
- See technical drawings
|
3/4" Details
Lotus Wall Mounted Handle 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall-mounted ¾” valves and cartridge
- ¾” NPT
- Total projection of handle : 3.⅞”
- Trim and valve supplied together
- flow rate: restricted : 1.8 GPM
- Available in all finishes. All finishes are live
- Made with low lead brass; includes possible ABS component
- Ref number:01406735
- OPTION
To be used in conjunction with our thermostatic shower systems or tub spout –
|
- Rough In-Depth: Minimum 3” – Maximum 418”
- Water pressure maximum: 45 PSI
- Recommended pressure: 45 to 60 PSI
- Connections: ¾” female NPT
- maximum flow: 17 GPM
- to be used with our ¾” thermostatic valve
- Metric threading available on request
- Flow rate for outside California or the USA: inquire
- unrestricted flow rate: installation must comply with your local State regulation
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.