Gauntlet Wall Mounted Lever

Knighthood and Chevalerie inspired this whimsical thematic lever. Available in 1/2” NPT and 3/4” NPT for showers and tubs. Available in wall mounted or deck mounted variations.

Share

Description

Gauntlet Wall Mounted Lever 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ½” valves and trim  
  • Lever turns up ¼ . -Left and right levers are supplied
  • valve is equipped with a security brake.  
  • Total height: 4” 
  • Width of Lever: 5”
  • Available in all finished. All finished are unlacquered. 
  • Flow rate : 1.2 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk 
  • Made with low lead brass; may includes ABS components.       
  • Ref # : Right lever09606730
  • Ref # : Left lever: 09606731
  1. Rough In-Depth: Minimum 234” – Maximum 518 
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection: ½” F. NPT- 
  6. Handle spread: N.A. 
  7. Metric threading available on request
  8. Flow rate for outside the USA: inquire
  9. Deck mounted handles: available 
  10. See technical drawings

3/4" Details

Gauntlet Wall Mounted Lever 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾” valves-
  • Lever turns  up ¼.   -Left and right levers are supplied
  • valve is equipped with a security brake.  
  • Total height: 4” 
  • Width of Lever: 5”
  • Available in all finished. All finished are unlacquered. 
  • Flow rate : 1.8 GPM ( 4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk 
  • Made with low lead brass; includes possible ABS components.     
  • Ref number: Right lever: 09606735
  • Ref number:  Left  lever:  09606736
  1. Rough In-Depth: Minimum 234” – Maximum 518 
  2. Hole diameter: 1.1/8” ( 3 cm )
  3. Water pressure maximum: 75 PSI (5 Bars)
  4. Recommended pressure: 60PSI
  5. Connection:  ¾” NPT- 
  6. Handle spread: N.A. 
  7. Metric threading available on request
  8. Flow rate for outside the USA: inquire
  9. Deck mounted handles: available 
  10. all valves and rough in are supplied 
  11. See technical drawings

Technical Specs

Gauntlet – Wall mounted lever handle – .5 inch NPT 9606730 specifications sheet

Gauntlet – Wall mounted lever handle – .75 inch NPT 9606735 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content