Share

Stella Wall Mounted Handle

Angles and curves, together with the design’s strong symmetry, all contribute to making a statement. Its elegant tone silhouette conveys a subtle sense of strength while proclaiming comfort and serenity.

Available in ½” and ¾” NPT for vanities, tubs and showers.

Description

Stella Wall Mounted Handle 1/2″ Details

 

HALLMARKS AND COMPONENTS
TECHNICAL INFORMATION
  • Deck mounted ½” valve included 
  • Handles turn ¼” to the right  
  • Total height : 4.1/4”
  • Width: handle 3.1/4” – octagonal base: 2.75”
  • Available in all finishes. All finishes are live
  • Flow rate: 1.2 GPM (4,5L/min) at 60 PSI (4.1 Bar)
  • Valves: ceramic disk
  • Made with low lead brass; includes possible ABS components                                   
  • Ref # for ½”: 11206730
  • Deck maximum thickness: 2” (5 cm)
  • Hole diameter: 1.1/8” (3 cm)
  • Water pressure maximum: 75 PSI (5 Bars)
  • Recommended pressure: 60PSI
  • Connection: wire flex provided; ½” connector
  • Handle spread: max. 11″ 
  • Metric threading available on request
  • Flow rate for outside USA: inquire
  • Wall mount setting available
  • ¾” valves available- 
  • See technical drawings

 

With the gently curving, flange edged, octagonal side handles that match an octagonal base plate give this regal looking Stella Wall Mounted Handle an unusual flair. 

At Compas, we maintain an expert understanding of design history. To guarantee beauty and inspirational products, we integrate high standards in our fabrication processes. We make sure that our manufacturing methods do not impact our environment negatively. You can buy Fixtures, Stones, Terra Cotta, Sinks and Home appointments with us and also, visit us at our Los Angeles location.

The highest quality comes from having the highest standards. Compas meticulously chooses and sources the best materials to manufacture its products. To conceptualize tomorrow’s estates, we can work around the purest ingots to cast our fixtures or the rarest marbles.

To complement its collections Compas designs and manufactures artistically detailed European bath systems, faucets and accessories, all fitted with state-of-the-art high technology components that function seamlessly for contemporary living.

3/4" Details

Stella Wall Mounted Handle 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Deck mounted 3/4” valve included 
  • Handles turns ¼” to the left  
  • Total height : 4.1/4”
  • Width: handle 3.1/4” – octagonal base: 2.75”
  • Available in all finishes. All finishes are live
  • Unrestricted flow rate: up to 12 GPM
  • Valves: ceramic disk
  • Made with low lead brass; includes possible ABS components                            
  • Ref #: 11206735
  • Deck maximum thickness: 2”  ( 5 cm )
  • Hole diameter: 1.1/8” ( 3 cm )
  • Water pressure maximum: 75 PSI (5 Bars)
  • Recommended pressure: 60 PSI
  • Connection : wire flex provided ; 3/4” connector
  • Handle spread: max. 11inches 
  • Metric threading available on request
  • Flow rate to comply to local state regulation
  • Maximum unrestricted flow rate up to 12 GPM
  • Wall mount setting available
  • See technical drawings

 

Technical Specs

STELLA _ Wall mount handle .5 inch NPT _ 11206730 specifications sheet

STELLA _ Wall mount handle ,75 inch NPT _ 11206735 specifications sheet

Additional Specs

Rough In Valves

ROUGH IN _ .5 INCH NPT _ 665202 specifications

ROUGH IN _ .75 INCH NPT _ 665302 specifications

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

join us
Get inspirational content, new arrival notifications and more. We do not share your information.
© 2023 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content