Tudor Wall Mounted Diverter Handle

Sculptural yet restrained, and vibrant with a soft touch, the finely crafted rose coronet is emblematic of its beauty.

Share

Description

Tudor Wall Mounted Diverter Handle Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾” valves with one inlet and  2 outlets   
  • must be used with a 0n/0ff control valve   
  • Total projection: 2.½”
  •  Diameter: 2.75”
  • Trim and valve supplied together
  • Available in all finishes. All finishes are unlaquered
  • Made with low lead brass; includes possible ABS components
  • Ref number with ¾” valve:08906602
  • OPTION
    To be used in conjunction with our thermostatic shower systems to activate 2 water points.      
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  50 to 60 PSI
  4. Connections: ¾” female 
  5. Handle spread: N/A 
  6. Metric threading available on request
  7. Flow rate for outside California or the USA: inquire
  8. Complies with California State water flow regulations
  9. Flow rate: installation must comply with your state regulation
  10. Meets California standard on multiple water point
  11. See technical drawings

Technical Specs

Tudor – Wall mounted 2 way diverter .75 inch NPT _ 08906602 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content