Share

Villa Wall Mounted Diverter Lever

The Villa’s baluster contoured silhouette is inspired by historic Mediterranean gardens and patterns. A gentle elegance that transcends any contemporary quandaries into serene tranquil fortitude. The Villa diverter addresses strict environmental water conservation regulations.

Description

Villa Wall Mounted Diverter Lever Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • The 2 point  control lever is 4” ¼” long 
  • In-wall-mounted ¾” NPT valves with one inlet & 2 outlets   
  • Must be used in conjunction with a  0n/0ff control valve   
  • Total projection: 2 .½”
  • Trim and valve supplied together
  • Available in all finishes. All finishes are live
  • Made with low lead brass; includes possible ABS components     
  • Ref #: 09501602
  • OPTION
    To be used  with our thermostatic shower systems to activate 2 water points               
  1. Rough In-Depth: Minimum 3” – Maximum 4 1/8 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  45 to 60 PSI
  4. Connections: ¾” female NPT
  5. maximum unrestricted flow: 17 GPM
  6. needs a control( on/off) to operate. 
  7. to be used with our ¾” thermostatic valve
  8. Metric threading available on request
  9. Flow rate for outside  the USA: inquire
  10. unrestricted flow rate: installation must comply with your local State regulation
  11. Meets California standard on multiple water point
  12. See technical drawings

Technical Specs

Villa-Wall-mounted-2-way-diverter-.75-inch-NPT – 09501602 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Request information

Skip to content