Share

Primo SP Wall Mounted Spout

The Primo faucet makes an impression with its imposing size and commanding presence. It creates a charmingly warm and weathered patina over time. This faucet, made by hand with the superb craftsmanship of French artisans, makes a bold and reassuring statement, readily living up to its moniker “Primo.”

It differs from its Primo counterpart due to the inclusion of an added base giving it extra projection and vigor.

Available in ½’’ and ¾’’ NPT for vanities, showers and tubs.

Description

Primo SP Wall Mounted Spout 1/2″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Elemental and slender this primary faucet fits many genres. 
  • Wall-mounted ½” spout 
  • Requires Two Handles Wall Mounted with Valve or deck mounted
  • Total projection: 8-7/8”
  • Width / diameter base: 2-3/4” 
  • Available in all finishes. All finishes are unlacquered
  • Made with low lead brass; includes possible ABS components                    
  • Ref number for ½”: 99006506-SP
  1. In/Flow Connection: Female ½” NPT
  2. Minimum Recommended Pressure: 20 PSI
  3. Recommended Pressure: 50 PSI
  4. Concealed Aerator included
  5. Flow rate : 1.2 GPM
  6. Metric Threading available upon request
  7. Flow rate for outside the USA: inquire
  8. Handles: see collections 
  9. Technical  drawing: see below 
  10. Weighted Average Lead content complies with 0.25%

 

The Primo faucet makes an impression with its imposing size and commanding presence. It creates a charmingly warm and weathered patina over time. This faucet, made by hand with the superb craftsmanship of French artisans, makes a bold and reassuring statement, readily living up to its moniker “Primo.”

Primo SP Wall Mounted Spout is made by hand with the superb craftsmanship of French artisans, makes a bold and reassuring statement, readily living up to its moniker “Primo.”

At Compas, we maintain an expert understanding of design history. To guarantee beauty and inspirational products, we integrate high standards in our fabrication processes. We make sure that our manufacturing methods do not impact our environment negatively.

The highest quality comes from having the highest standards. Compas meticulously chooses and sources the best materials to manufacture its products. To conceptualize tomorrow’s estates, we can work around the purest ingots to cast our fixtures or the rarest marbles.

To complement its collections Compas designs and manufactures artistically detailed European bath systems, faucets and accessories, all fitted with state-of-the-art high technology components that function seamlessly for contemporary living.

Additional information

Size

1/2", 3/4"

3/4" Details

Primo SP Wall Mounted Spout 3/4″ Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾”  spout 
  • Requires Two Handles Wall Mounted with Valve
  • Total projection: 9-⅞”
  • Width / diameter base: 3” 
  • Available in all finishes. All finishes are unlacquered.
  • Made with low lead brass; includes possible ABS components                
  • Ref number for ¾”:  99006505-SP
  1. In/Flow Connection: Female ¾” NPT
  2. Minimum Recommended Pressure: 20 PSI
  3. Recommended Pressure: 50 PSI
  4. Concealed Aerator included
  5. Restricted flow rate: 1.8 GPM.
  6. Metric Threading available upon request
  7. Flow rate for outside the USA: inquire
  8. Technical  drawing: see below 
  9. Weighted Average Lead content complies with 0.25%

Technical Specs

Primo-Wall-mounted-spout-.5-inch-NPT-_-99006506-SP specifications sheet

Primo-Wall-mounted-spout-.75-inch-NPT-_-99006505-SP specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Request information

Skip to content