Lotus Wall Mounted Handle Diverter

Aerial and abloom this soft curved handle displays a flower as its knob. Available in 1/2” and 3/4” NPT for showers and tubs.

Share

Description

Lotus Wall Mounted Handle Diverter Details

 

HALLMARKS & COMPONENTS
TECHNICAL INFORMATION
  • Wall-mounted ¾” valves with one inlet and  2 outlets   
  • Must be used with a 0n/0ff control valve 
  • ¾” NPT  
  • Total projection of handle : 3.⅝”
  • Trim and valve supplied together
  • Available in all finishes. All finishes are live
  • Made with low lead brass; includes possible ABS component
  • Ref number:01406602
  • OPTION
    To be used in conjunction with our thermostatic shower systems to activate 2 water points –
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  45 to 60 PSI
  4. Connections: ¾” female NPT
  5. maximum flow: 17 GPM
  6. needs a valve control on/off to operate. 
  7. to be used with our ¾” thermostatic valve
  8. Metric threading available on request
  9. Flow rate for outside California or the USA: inquire
  10. unrestricted flow rate: installation must comply with your local State regulation
  11. Meets California standard on multiple water point
  12. See technical drawings

Technical Specs

Lotus – Wall mounted 2 way diverter .75 inch NPT _ 01406602 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

Compas Architectural Stone & Design

Follow Us

© 2022 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content