Cruciform Wall Mounted Diverter Handle

Meticulously detailed and textured. This fixture’s artisanal quality is sure to sublime any space. Wall mounted handle with beaded escutcheon detail. 

Available in 1/2″ NPT and 3/4″ NPT for vanities, tubs and showers.


Cruciform Wall Mounted Diverter Handle Details


  • Wall-mounted ¾” valves with one inlet and 2 outlets   
  • must be used with a 0n/0ff control valve   
  • Total projection: 3.¼”
  •  Diameter: 2.75”
  • Train and valve supplied together
  • Available in all finishes. All finishes are live
  • Made with low lead brass; includes possible ABS components.
  • Ref number with ¾” valve: 08506602
    To be used in conjunction with our thermostatic shower systems to activate 2 water points.       
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  50 to 60 PSI
  4. Connections: ¾” female 
  5. Handle spread: N/A 
  6. Metric threading available on request
  7. Flow rate for outside California or the USA: inquire
  8. Complies with California State water flow regulations
  9. Flow rate: installation must comply with your state regulation
  10. Meets California standard on multiple water point
  11. See technical drawings

Technical Specs

Cruciform-Wall-mounted-diverter-.75-inch-NPT – 08506602 specifications sheet


At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.


join us
Get inspirational content, new arrival notifications and more. We do not share your information.
European Stones & High-End Bath Fittings
© 2023 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content