Description
Cruciform Wall Mounted Diverter Handle Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Wall-mounted ¾” valves with one inlet and 2 outlets
- must be used with a 0n/0ff control valve
- Total projection: 3.¼”
- Diameter: 2.75”
- Train and valve supplied together
- Available in all finishes. All finishes are live
- Made with low lead brass; includes possible ABS components.
- Ref number with ¾” valve: 08506602
- OPTION
To be used in conjunction with our thermostatic shower systems to activate 2 water points.
|
- Rough In-Depth: Minimum 3” – Maximum 418”
- Water pressure maximum: 145 PSI
- Recommended pressure: 50 to 60 PSI
- Connections: ¾” female
- Handle spread: N/A
- Metric threading available on request
- Flow rate for outside California or the USA: inquire
- Complies with California State water flow regulations
- Flow rate: installation must comply with your state regulation
- Meets California standard on multiple water point
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.
