Description
Madison Deck Mounted Lever 1/2″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Deck mounted ½” valves included
- Lever turns ¼ forward – left and right levers supplied
- Total height: 4.1/8”
- Width: 4.7/8” from center to end of the lever
- Available in all finishes. All finishes are unlaquered
- Flow rate: 1.2 GPM (4,5L/min) at 60 PSI (4.1 Bar)
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS components
- Ref # right hand: 09106720
- Ref # left hand: 09106721
- Wall-mount setting available
|
- Deck maximum thickness: 2” (5 cm)
- Hole diameter: 1.1/8” (3 cm)
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection : wire flex provided ; ½” connector
- Handle spread: max. 11inches
- Metric threading available on request
- Flow rate for outside USA: inquire
- See technical drawings
|
—
An uptown 1930’s flair infuses the flowing shape of this Madison Deck Mounted Lever.
At Compas, we maintain an expert understanding of design history. To guarantee beauty and inspirational products, we integrate high standards in our fabrication processes. We make sure that our manufacturing methods do not impact our environment negatively.
The highest quality comes from having the highest standards. Compas meticulously chooses and sources the best materials to manufacture its products. To conceptualize tomorrow’s estates, we can work around the purest ingots to cast our fixtures or the rarest marbles.
To complement its collections Compas designs and manufactures artistically detailed European bath systems, faucets and accessories, all fitted with state-of-the-art high technology components that function seamlessly for contemporary living.
3/4" Details
Madison Deck Mounted Lever 3/4″ Details
HALLMARKS & COMPONENTS
|
TECHNICAL INFORMATION
|
- Deck mounted ¾” valves included
- Lever turns ¼ forward – left and right levers supplied
- Total height: 4.1/8”
- Width: 4.⅞” from center to end of the lever
- Available in all finishes. All finishes are unlacquered
- Flow rate: 1.75GPM at 60 PSI
- Valves: ceramic disk
- Made with low lead brass; includes possible ABS components
- Ref # right hand: 09106725
- Ref # left hand: 09106726
|
- Deck maximum thickness: 2” ( 5 cm )
- Hole diameter: 1.1/8” ( 3 cm )
- Water pressure maximum: 75 PSI (5 Bars)
- Recommended pressure: 60PSI
- Connection : ¾” female NPT
- Metric threading available on request
- Flow rate for outside USA: inquire
- See technical drawings
|
Finishes
At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.
Review all finishes available by clicking here.
