Liberty Wall Mounted Diverter Lever

The refined Liberty lever is convenient, and timeless in appearance. It fits our modern way of life and addresses our environmental concerns by saving water.


Liberty Wall Mounted Diverter Lever Details


  • The control lever is 4” long 
  • In-wall-mounted ¾” NPT valves with one inlet and 2 outlets   
  • Must be used in conjunction with a  0n/0ff control valve   
  • Total projection: 3.?”
  • Trim and valve supplied together
  • Available in all finishes. All finishes are live
  • available with multiple choices of crystal lever
  • Made with low lead brass; includes possible ABS component
  • Ref number with ¾” valve: 11106602
    To be used in conjunction with our thermostatic shower systems to activate 2 water points –
  1. Rough In-Depth: Minimum 3” – Maximum 418 
  2. Water pressure maximum: 145 PSI 
  3. Recommended pressure:  45 to 60 PSI
  4. Connections: ¾” female NPT
  5. maximum unrestricted flow: 17 GPM
  6. needs a control( on/off) to operate. 
  7. to be used with our ¾” thermostatic valve
  8. Metric threading available on request
  9. Flow rate for outside California or the USA: inquire
  10. unrestricted flow rate: installation must comply with your local State regulation
  11. Meets California standard on multiple water point
  12. See technical drawings

Technical Specs

Liberty-Wall-mounted-2-way-diverter-.75-inch-NPT – 11106602 specifications sheet


At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

join us
Get inspirational content, new arrival notifications and more. We do not share your information.
Compas Architectural Stone & Design
European Stones & High-End Bath Fittings
© 2023 All Rights Reserved - Compas Architectural Stone & Design.

Request information

Skip to content