Montecito Wall Mounted Diverter Lever

The Montecito refined hand-hammered octagonal lever is convenient, and early Californian in appearance. It fits our modern way of life and addresses our environmental concerns by saving water.

Description

Montecito Wall Mounted Diverter Lever Details

HALLMARKS & COMPONENTS

TECHNICAL INFORMATION

The control lever is 3 ?” long
In-wall-mounted ¾” NPT valves with one inlet and 2 outlets
Must be used in conjunction with a 0n/0ff control valve
Total projection: 3.½”
Trim and valve supplied together
Available in all finishes. All finishes are unlacquered
Made with low lead brass; includes possible ABS components
REF #: 017301602
OPTION
To be used in conjunction with our thermostatic shower systems to activate 2 water points –

Rough In-Depth: Minimum 3” – Maximum 4-1/8”
Water pressure maximum: 145 PSI
Recommended pressure: 45 to 60 PSI
Connections: ¾” female NPT
maximum unrestricted flow: 17 GPM
needs a control( on/off) to operate.
to be used with our ¾” thermostatic valve
Metric threading available on request
Flow rate for outside California or the USA: inquire
unrestricted flow rate: installation must comply with your local State regulation
Meets California standard on multiple water point
See technical drawings

Technical Specs

Montecito-Wall-mounted-2-way-diverter-.75-inch-NPT – 017301602 specifications sheet

Finishes

At Compas we offer a large selection finishes. All our finishes are live and patinate over time. We are environmentally conscious and all our finishes adhere to the highest, strict and controlled ecological standards.

Review all finishes available by clicking here.

REQUEST INFORMATION